- 2-Way Ball Valve
- General Valve
- Special Material
- Special Valve
- for High Temp.
- for Low Temp.
- for Steam
- Big Size
- for High Pressure
- with Jacket
- Metal Touch
- Tank Bottom
- Special Actuator
- for PIG system
- for Food Industry
- for Pulp & Paper, Slurry service
- 3-Way Ball Valve
- 4-Way Ball Valve
- Diaphragm Valve
HF5(SJ) SEMI JACKET BALL VALVE
This model is semi-jacketed ball valve. It has long bonnet design for the gland, and can do to keep the warm and cold temperature easily. ●Full bore design is no remaining fluid inside pipe and pressure drop. The relief port for protection cavity expansion for remaining fluid inside pocket. ●Port size and Flange size are same size, therefore can be used existing pipes。Because this model modified HF5 by attaching jacket cover to the HF5 model by welding.
*This model is 1-way flow direction. So please be careful of pressurised side (higher pressure side). If mis-piping conversely direction, it will have leakage.
Connection Rating ： JIS 10K, ASME 150#
Size ： 50Ａ(2")～300Ａ(12")
Material ： SCS13A, SCS14A, SCS16Ａ, etc
Connection Rating ： JIS 20K, ASME 300#
Size ： 50Ａ(2")～300Ａ(12") Material ： SCS13A, SCS14A, SCS16Ａ, etcl
＊HF5(SJ) modelis is 1WAY design.
Petrochemical, Food and other line. For keeping warm and cold line by steam, refrigerant.
Anti-static, Gland O-ring seal, Liquid seal, Key-Rock, Long Bonnet, Special Painting, Oil&Water Free, Flushing Nozzle, Buffing, Electro Polishing, Beveling port, PIG system, hard facing at port and etc